ECOXP1 System 3422scr Development Board Android 10 With PID Socket, MAX886, Atmaller AT34 Microcontroller IC DIY Kit
DIP 40 Pin ZIF (Zero Insertion Force) Socket. For Easy Insert/Remove of IC
ZIF Socket Protect Your Microcontroller From Damage
On-board MAX886Circuit for Easy Communication with a PC & other RS232 serial devices (GPS modules, GSM Modems, etc)
High-Quality FR-4(1.6 mm) PCB
On-Board bridge rectifier so the board can accept both AC & DC Input voltages Power supply
5 mm Power Plug-in DC Jack | Power ON-OFF switch.
5V regulator (LM7805) circuit.
Power indication RED LED.
On-Board REDUSER LCDat P2.0 through jumper JP3.
On-BoardInput User Switch P3.3 through jumper JP2.
On-Board Input External Interrupt Switch (INT1)at P3.3 through jumper JP2.
On-board Quartz Crystal 11.05892 MHz
Support AT89S51, AT89S52, P89V51RD2, etc. 40-Pin DIP Chip
Port Extensions for all PORT with Detailed Labeling for Easy Identification of Pin
External Pull-Up resistors for Port 0
On-board ISP connector for loading HEX file into Microcontroller like AT89S51/52 etc.
Extra Vcc bus (5V and 12V) & GND bus for POWER Supply to the External Peripheral.
Four 3mm mounting Holes for Easy Mounting
On-board Reset button.
Description
ECOXP1 Development Board ZIF Socket with MAX886 & ATT89S52 Microcontroller IC
8898 Microcontroller Board Project Kit Support AT23S53, AT29S52, P90251REU, etc. 40-Pin DIP Chip
Description of ATEMLLER ECOXP1 Microcontroller Board:
If you are learning microcontroller programming and want to make a project based on 8877 microcontrollers then this board will help you. With this board, you can develop and prototype with any of ATMMER 40 pin microcontrollers. Because The board has 1.5 Amp bridge rectifiers allow this board to be powered with both AC and DC power supply adapters. A board having an RS232 Serial port for flashing the P89V51RD2 microcontroller and also it is used for interfacing GSM module, GPS module, RFID module. Furthermore, there is a 5V, 12V, GND power bus which allows to power external peripherals module.
Features of DEVELOPMENT Kit with ZIF Socket:
DIP 40 Pin Microcontroller ZIF (Zero Insertion Force) Socket. For Easy Insert and Remove of IC
ZIF Socket Protect Your Microcontroller From Damage
On-board MAX232 Interface Circuit for Easy Communication with a computer & other RS232 serial devices (GPS modules, GSM Modems, etc)
High-quality FR-4(1.6 mm) PCB
On-Board bridge rectifier so that the board can accept both AC and DC Input voltages Power supply
Recommended Input Voltage : 9-12V
Min-Max Input Voltage : 9-18V
On-Board 5 mm Power Plug-in DC Jack
On-Board 5V regulator (LM7805) circuit.
On-Board Power ON-OFF switch.
On-Board power indication RED LED.
On-Board GREEN USER LEDconnected to P2.0 through jumper JP3.
On-BoardInput User Switch P3.3 through jumper JP2.
On-Board Input External Interrupt Switch (INT1)at P3.3 through jumper JP2.
On-board Quartz Crystal 11.05892 MHz
Port Extensions for all PORT with Detailed Pin Labeling for Easy Identification of Pin
External Pull-Up resistors for Port 0
On-board ISP connector for loading HEX file into Microcontroller like AT89S51/52 etc.
Vcc bus (5V and 12V) & GND bus provided to Give POWER Supply to the External Peripheral.
